Mae addaswyr hydrolig yn un math o ffitiadau hydrolig, i gysylltu'r tiwbiau hydrolig, cynulliad pibell hydrolig a ffitiadau tiwb. Mae yna enwau gwahanol fel hydraulicadaptors (DU), ffitiadau hydrolig (mwyaf poblogaidd), cysylltwyr hydrolig ac ati.
Mathau o addaswyr hydrolig gyda gwahanol safonau fel a ganlyn:
Safonau SAE America fel SAE J514, SAE J1453, SAE J518 ac ati, ffitiadau tiwb hydrolig edau SAE, addaswyr pibellau, addaswyr fflans, ffitiadau pibellau.
Edau JIS B2351 modfedd safonol JIS Japaneaidd a ffitiadau diwedd edau metrig JIS B8363 ac addaswyr ar gyfer gwasanaethau pibell hydrolig.
Safonau Prydain BS 5200, addaswyr hydrolig edau BSP a chysylltwyr.
Safon yr Almaen DIN 2353,Ffitiadau tiwb cywasgu edau metriggyda chylch torri, ffitiadau metrig di-fflach a chyplyddion.
Mae Jiayuan yn wneuthurwr blaenllaw, proffesiynol o ffitiadau addasydd hydrolig, rydym yn cynnig safonau a meintiau arfer amrywiol fel addaswyr pibell hydrolig, addaswyr hydrolig metrig, addaswyr hydrolig sae, addaswyr flange sae, addaswyr trosi i'w gilydd mathau JIC, metrig, npt, orfs. , gwryw i fenyw ac ati
Mae Jiayuan yn gwneud cynnydd da ym maes rheoli rheoli ansawdd a thechnoleg cynhyrchu awtomeiddio, gan ymdrechu i arwain ym maes ffitiadau hydrolig. Rydym yn rheoli ansawdd cynnyrch yn llym o ddeunydd i gynhyrchion gorffenedig yn ôl ISO 9001, adroddiad PPAP gan gynnwys adroddiad cyfansoddiad cemegol materol, archwilio dimensiwn, prawf chwistrellu halen, profi pwysau, prawf torque ac adroddiad glendid ac ati.
Defnyddir ein cynnyrch mewn amryw o offer diwydiannol megis peiriannau adeiladu peirianneg, offer amaethyddol, cerbydau masnachol, offer petrocemegol, adeiladu llongau morwrol ac ati. Allforiwyd ein cynnyrch i'r Almaen, Japan, y DU, yr Eidal, Canada, Rwsia, Brasil ac ati.
Os oes gennych unrhyw ymholiad, mae croeso i chi gysylltu â ni.
jyray@72338.com
Maint safonol amrywiol yr addasydd hydrolig JIC, ORFS, flange SAE, DIN, JIS fel a ganlyn:
DIN 2353 24 côn diwedd côn (DIN 3861 / ISO 8434-1) ffitiadau tiwb cywasgu dimensiwn
TubeO.D. | ||||||
Maint | T1 | Ø D3mm | Ø D4mm | Ø D5mm | L1mm | L2mm |
04-LL | M08×1.0 | 04 | 5.0 | 3.0 | 4.1 | 8 |
06-LL | M10×1.0 | 06 | 7.5 | 4.5 | 5.6 | 8 |
08-LL | M12×1.0 | 08 | 9.5 | 6.0 | 5.6 | 9 |
10-LL | M14×1.0 | 10 | 11.5 | 8.0 | 5.6 | 9 |
12-LL | M16×1.0 | 12 | 13.5 | 10.0 | 6.1 | 9 |
06-L | M12×1.5 | 06 | 8.1 | 4.0 | 7.1 | 10 |
08-L | M14×1.5 | 08 | 10.1 | 6.0 | 7.1 | 10 |
10-L | M16×1.5 | 10 | 12.3 | 8.0 | 7.1 | 11 |
12-L | M18×1.5 | 12 | 14.3 | 10.0 | 7.1 | 11 |
15-L | M22×1.5 | 15 | 17.3 | 12.0 | 7.1 | 12 |
18-L | M26×1.5 | 18 | 20.3 | 15.0 | 7.6 | 12 |
22-L | M30×2.0 | 22 | 24.3 | 19.0 | 7.6 | 14 |
28-L | M36×2.0 | 28 | 30.3 | 24.0 | 7.6 | 14 |
35-L | M45×2.0 | 35 | 38.0 | 30.0 | 10.6 | 16 |
42-L | M52×2.0 | 42 | 45.0 | 36.0 | 11.1 | 16 |
06-S | M14×1,5 | 06 | 8.1 | 4.0 | 7.1 | 12 |
08-S | M16×1.5 | 08 | 10.1 | 5.0 | 7.1 | 12 |
10-S | M18×1.5 | 10 | 12.3 | 7.0 | 7.6 | 12 |
12-S | M20×1.5 | 12 | 14.3 | 8.0 | 7.6 | 12 |
14-S | M22×1.5 | 14 | 16.3 | 10.0 | 8.1 | 14 |
16-S | M24×1.5 | 16 | 18.3 | 12.0 | 8.6 | 14 |
20-S | M30×2.0 | 20 | 22.9 | 16.0 | 10.6 | 16 |
25-S | M36×2.0 | 25 | 27.9 | 20.0 | 12.1 | 18 |
30-S | M42×2.0 | 30 | 33.0 | 25.0 | 13.6 | 20 |
38-S | M52×2.0 | 38 | 41.0 | 32.0 | 16.1 | 22 |
Cysylltydd troi 24 ° DKO (DIN 3865 / DIN EN ISO 8434-4) ffitiadau tiwb cywasgu dimensiwn
TubeO.D. | Ø D5mm | |||
Maint | T | Ø D2mm | Threadcydrediamedr | SWmm |
06-L | M12×1.5 | 5.5 | 10.38 | 14 |
08-L | M14×1.5 | 7.5 | 12.38 | 17 |
10-L | M16×1.5 | 9.7 | 14.38 | 19 |
12-L | M18×1.5 | 11.7 | 16.38 | 22 |
15-L | M22×1.5 | 14.7 | 20.38 | 27 |
18-L | M26×1.5 | 17.7 | 24.38 | 32 |
22-L | M30×2.0 | 21.7 | 27.84 | 36 |
28-L | M36×2.0 | 27.7 | 33.84 | 41 |
35-L | M45×2.0 | 34.5 | 42.84 | 50 |
42-L | M52×2.0 | 41.5 | 49.84 | 60 |
06-S | M14×1.5 | 5.5 | 12.38 | 17 |
08-S | M16×1.5 | 7.5 | 14.38 | 19 |
10-S | M18×1.5 | 9.7 | 16.38 | 22 |
12-S | M20×1.5 | 11.7 | 18.38 | 24 |
14-S | M22×1.5 | 13.5 | 20.38 | 27 |
16-S | M24×1.5 | 15.5 | 22.38 | 30 |
20-S | M30×2.0 | 19.5 | 29.84 | 36 |
25-S | M36×2.0 | 24.5 | 33.84 | 46 |
30-S | M42×2.0 | 29.5 | 39.84 | 50 |
38-S | M52×2.0 | 37.5 | 49.84 | 60 |
Diwedd ffitiadau tiwb hydrolig ORFS gwrywaidd (ISO 8434-3 / SAE J1453) / dimensiynau
Ø D5 Maint | TubeO.D. | T Cenhedloedd Unedig / UNF | T MawrthreadØ mm | Ø D3mm | |
modfedd | mm | ||||
4 | 1/4 | 6 | 9/16-18 | 14.0 | 5.0 |
6 | 5/16,3/8 | 8, 10 | 11/16-16 | 17.0 | 6.5 |
8 | 1/2 | 12 | 13/16-16 | 20.5 | 9.5 |
10 | 5/8 | 14, 15, 16 | 1-14 | 25.0 | 12.5 |
12 | 3/4 | 18, 20 | 1 3/16-12 | 30.0 | 15.5 |
16 | 7/8,1 | 22, 25 | 1 7/16-12 | 36.0 | 20.5 |
20 | 1 1/4 | 28, 30, 32 | 1 11/16-12 | 42.5 | 26.0 |
24 | 1 1/2 | 35, 38 | 2-12 | 50.5 | 32.0 |
32 | 2 | 50 | 2 1/2-12 | 63.0 | 45.0 |
Dimensiynau cysylltydd troi offer hydrolig benywaidd ORFS (ISO 8434-3 / SAE J1453)
Maint | TubeO.D. | T Cenhedloedd Unedig / UNF | Ø D5 Threadcydrdiamedr e mm | SWmm | Ø D2mm | |
modfedd | mm | |||||
4 | 1/4 | 6 | 9/16-18 | 12.5 | 17 | 4.0 |
6 | 5/16,3/8 | 8, 10 | 11/16-16 | 16.0 | 22 | 6.5 |
8 | 1/2 | 12 | 13/16-16 | 19.0 | 24 | 9.0 |
10 | 5/8 | 14, 15, 16 | 1-14 | 23.0 | 30 | 11.5 |
12 | 3/4 | 18, 20 | 1 3/16-12 | 28.0 | 36 | 14.0 |
16 | 7/8,1 | 22, 25 | 1 7/16-12 | 34.0 | 41 | 20.0 |
20 | 1 1/4 | 28, 30, 32 | 1 11/16-12 | 40.5 | 50 | 26.0 |
24 | 1 1/2 | 35, 38 | 2-12 | 48.0 | 60 | 32.0 |
Dimensiynau diwedd tiwb fflêr ffitiadau hydrolig JIC gwrywaidd (ISO 8434-2 / SAE J514)
Maint | TubeO.D. | T Cenhedloedd Unedig / UNF | T MawrthreadØ mm | Ø D1mm | |
modfedd | mm | ||||
4 | 1/4 | 6 | 7/16-20 | 11.0 | 4.5 |
5 | 5/16 | 8 | 1/2-20 | 12.5 | 6.0 |
6 | 3/8 | 10 | 9/16-18 | 14.0 | 7.5 |
8 | 1/2 | 12 | 3/4-16 | 19.0 | 10.0 |
10 | 5/8 | 14, 15, 16 | 7/8-14 | 22.0 | 12.5 |
12 | 3/4 | 18, 20 | 1 1/16-12 | 27.0 | 15.5 |
14 | 7/8 | 22 | 1 3/16-12 | 30.0 | 18.0 |
16 | 1 | 25 | 1 5/16-12 | 33.0 | 21.5 |
20 | 1 1/4 | 28, 30, 32 | 1 5/8-12 | 41.0 | 27.5 |
24 | 1 1/2 | 35, 38 | 1 7/8-12 | 47.5 | 33.0 |
28* | 1 3/4 | 42 | 2 1/4-12 | 57.0 | 39.0 |
32 | 2 | – | 2 1/2-12 | 63.5 | 45.0 |
Dimensiynau cysylltydd swivel ffitiadau hydrolig benywaidd JIC (ISO 8434-2 / SAE J514)
Maint | TubeO.D. | T Cenhedloedd Unedig / UNF | SWmm | Ø D5 Threadcydrdiamedr e mm | Ø D2mm | |
modfedd | mm | |||||
4 | 1/4 | 6 | 7/16-20 | 17 | 10.0 | 4.4 |
5 | 5/16 | 8 | 1/2-20 | 17 | 11.5 | 6.0 |
6 | 3/8 | 10 | 9/16-18 | 19 | 13.0 | 7.5 |
8 | 1/2 | 12 | 3/4-16 | 22 | 17.5 | 9.9 |
10 | 5/8 | 14, 15, 16 | 7/8-14 | 27 | 20.5 | 12.3 |
12 | 3/4 | 18, 20 | 1 1/16-12 | 32 | 25.0 | 15.5 |
14 | 7/8 | 22 | 1 3/16-12 | 35 | 28.0 | 18.0 |
16 | 1 | 25 | 1 5/16-12 | 38 | 31.0 | 21.5 |
20 | 1 1/4 | 28, 30, 32 | 1 5/8-12 | 50 | 39.0 | 27.5 |
24 | 1 1/2 | 35. 38 | 1 7/8-12 | 60 | 45.5 | 33.0 |
32 | 2 | – | 2 1/2-12 | 75 | 61.5 | 45.0 |
Addasydd Hydrolig Gwryw dimensiynau diwedd côn 60 ° (ISO / DIS 8434-6)
Maint | T BSPP | D2 mm | D3 mm | L1 mm | T1 | T2 BSPP | |
BSPT | NPT (F) | ||||||
02 | G1/8A | 3.5 | 7.5 | 8 | 1/8 1/4 | 1/8 1/4 | 1/8 |
04 | G1/4A | 4.7 | 10.4 | 11 | 1/4 1/8 3/8 | 1/4 1/8 3/8 | 1/4 1/8 |
06 | G3/8A | 7.9 | 14.0 | 12 | 3/8 1/4 1/2 | 3/8 1/4 1/2 | 3/8 1/4 |
08 | G1/2A | 11.1 | 17.5 | 14 | 1/2 3/8 | 1/2 3/8 3/4 | 1/2 1/4 3/8 |
10 | G5/8A | 14.3 | 19.3 | 16 | 1/2 3/4 | 1/2 5/8 | |
12 | G3/4A | 16.7 | 22.9 | 16 | 3/4 1/2 1 | 3/4 1/2 1 | 3/4 1/4 3/8 1/2 5/8 |
16 | G1 A | 22.2 | 28.7 | 19 | 1 3/4 | 1 3/4 | 1 1/2 5/8 3/4 |
20 | G1 1/4A | 28.6 | 36.8 | 22 | 1 1/4 | 3/4 1 1 1/4 | |
24 | G1 1/2A | 33.3 | 42.7 | 22 | 1 1/2 | 1 1 1/4 1 1/2 | |
32 | G2 A | 46.0 | 54.6 | 25 | 1 1/2 2 | ||
Dimensiynau diwedd côn DIN 60 ° (DIN 7631)
TubeO.D.mm | T | Ø D1mm | Ø D2mm | L1 mm | SWmm |
4–5 06 08 10 12 15 18 22 28 35 42 | M10×1.5 M12×1.5 M14×1.5 M16×1.5 M18×1.5 M22×1.5 M26×1.5 M30×1.5 M38×1.5 M45×1.5 M52×1.5 | 3 4 6 8 10 12 15 19 25 32 39 | 8.0 9.0 11.0 13.0 15.0 19.0 22.0 26.0 33.0 40.0 47.0 | 8 10 10 11 11 12 12 14 14 16 16 | 11 12 14 17 19 24 27 32 41 46 55 |
Tagiau poblogaidd: ffitiadau math addasydd hydrolig, Tsieina, gweithgynhyrchwyr, cyflenwyr, arfer, pres, swagelok, Parker, Stauff, Brennan, dur gwrthstaen
